Module 9301 Find The Number Of An Entry In The Pocket Table; Module 9302 Search For A Free Pocket In The Tool Magazine - HEIDENHAIN TNC 426 PB/M Technical Manual

6 – 412

Module 9301 Find the number of an entry in the pocket table

Module 9301 determines the number of an entry in the pocket table. This
number is necessary for the modules in which no tool magazine numbers can
be entered.
Call:
PS B/W/D/K <Tool magazine number>
PS B/W/D/K <Pocket number>
CM 9301
PL B/W/D <Number of the entry in the pocket table>
–1: M4203 = 1
Error recognition:
Marker Value Meaning
M4203 0 Number of the entry was found
1 Error code in W1022
W1022 1 Invalid tool magazine number
2 Invalid pocket number
20 Module was not called in a spawn job or submit job

Module 9302 Search for a free pocket in the tool magazine

Module 9302 searches for a free pocket in a tool magazine.
Call:
PS B/W/D/K <Tool magazine number>
PS B/W/D/K <Pocket at which the search is to be started>
CM 9302
PL B/W/D <Number of the free pocket>
–1: No vacant pocket available
Error recognition:
Marker Value Meaning
M4203 0 Vacant pocket was found
1 Error code in W1022
W1022 1 Invalid pocket number
2 Invalid tool magazine number
20 Module was not called in a spawn job or submit job
36 Error in file handling
HEIDENHAIN Technical Manual TNC 426, TNC 430