Table of Contents
Advertisement
6 – 460
During recording, the selected signals are continuously displayed. After
recording ends, the memory contents are displayed. For every channel, the
type of signal and the resolution are also shown. The length of the recorded
range, with respect to the entire memory content, is shown as a bar in the
status field.
7 7 7 7
Move the cursor with the arrow keys. The status field shows the amplitude
of the selected channel and the time with respect to the beginning of
recording.
7 7 7 7
Activate a second cursor by pressing the CURSOR 1/2 soft key. The
oscilloscope displays the amplitude and time of this cursor. The time [s] of
the second cursor is shown with respect to the time point of the first cursor.
With this function you can measure the acceleration time of an axis, for
example.
Meaning of the soft keys:
Meaning of the soft keys:
You select one of the four channels, and a new soft-key row with
the following soft keys appears.
Invert the signal.
Move the signal down
Move the signal up
Decrease the vertical resolution.
Increase the vertical resolution.
Optimum vertical resolution. The signal is centered in
the picture. With NO ENT you return to the resolution
chosen originally.
Switch to second cursor.
Return to oscilloscope display.
HEIDENHAIN Technical Manual TNC 426, TNC 430
Advertisement
Table of Contents
