Table of Contents
Advertisement
S → M: Manual tool
follows a special
tool
December 2001
With this change sequence, two pocket numbers or two tool numbers must
be transferred in succession. M4520 indicates that another TOOL CALL
strobe (M4073) will follow. Regardless of marker M4540, the pocket number
of the old tool and tool number zero are transferred first.
Zero means clear the spindle!
7 7 7 7
Acknowledge with M4093.
Then the pocket number –1 and tool number of the new, called tool are
transferred.
Pocket number –1 means: no pocket in the tool magazine!
Tool Changer
6 – 433
Advertisement
Table of Contents
