Table of Contents
Advertisement
December 2001
Module 9250 Starting the PLC editor for tables
With this module you start a table editor in the machining modes (compare
"Tool Tables").
Call only in a submit job or spawn job.
Call:
PS
B/W/D/K/S<String with table name>
Complete path and name
PS
B/W/D/K/S<String with columns to be edited>
PS
B/W/D/K <First line >
[0 to 65 535]
PS
B/W/D/K <Last line>
[0 to 65 535]
PS
B/W/D/K <Mode>
Bit 0=1: Lines can be inserted and deleted
(if all lines and columns are selected)
Bit 1=1: Edit in the original file
(if all lines and columns are selected)
Bit 2=0: Shown as a table
Bit 2=1: Shown as a formula
CM
9250
Error recognition:
Marker
Value
Meaning
M4203
0
Editor was opened
1
Error code in W1022
W1022
1
First and last line do not define a meaningful range, or
incorrect value for mode was transferred
3
Impermissible string number
7
The module could not read from the table or open the
temporary file
20
Module was not called in a spawn job or submit job
28
PLC editor already open for another table
29
The opened file is not a table (extension .TAB or .P)
30
Column name not found
M4159
PLC editor: END key or soft key
pressed
Display and Operation
Set
Reset
NC
NC/PLC
6 – 317
Advertisement
Table of Contents
