Table of Contents
Advertisement
6 – 224
RM
RM
Note
As of NC software 280 476-01 you can save the values for MP950.x with
the actual-position-capture key.
MP950.0-8
Datum for positioning blocks with M92 for axes 1 to 9
Input:
-99 999.9999 to +99 999.9999 [mm] or [°]
Values with respect to the machine datum
MP960.0-8
Machine datum for axes 1 to 9
Input:
-99 999.9999 to +99 999.9999 [mm] or [°]
Values with respect to the scale reference point
MP7295
Disabling "datum setting"
Format:
%xxxxxxxxx
Input:
Bits 0 to 8 correspond to axes 1 to 9
0: Not disabled
1: Disabled
MP7296
"Datum setting" through axis keys
Input:
0: Datum can be set by axis keys and soft key
1: Datum can be set only by soft key
HEIDENHAIN Technical Manual TNC 426, TNC 430
RM
Advertisement
Table of Contents
