HEIDENHAIN TNC 426 PB/M Technical Manual page 285

MP Function and input
MP6570 Max. permissible surface cutting speed at the tooth edge
Input:
MP6572 Maximum permissible speed during tool measurement
Input:
MP6580.0-2 Coordinates of the TT 130 probe contact center with
respect to the machine datum (traverse range 1)
Input:
MP6581.0-2 Coordinates of the TT 130 probe contact center with
respect to the machine datum (traverse range 2)
Input:
MP6582.0-2 Coordinates of the TT 130 probe contact center with
respect to the machine datum (traverse range 3)
Input:
MP6585 Monitoring the position of the rotary and additional linear
axes during the tool measurement cycles
Format:
Input:
MP6586 Ref. coordinate for monitoring the position of the
rotary and additional linear axes during the tool
measurement cycles
Input:
MP6586.0-5 Axes A to W
December 2001
1.0000 to 129.0000 [m/min]
1 to 1000 [rpm]
0: 1000 [rpm]
-99 999.9999 to +99 999.9999 [mm]
-99 999.9999 to +99 999.9999 [mm]
-99 999.9999 to +99 999.9999 [mm]
%xxxxxx
0: Axis is not monitored
1: Axis is monitored
Bit 0 – A axis
Bit 1 – B axis
Bit 2 – C axis
Bit 3 – U axis
Bit 4 – V axis
Bit 5 – W axis
-99 999.9999 to +99 999.9999 [mm or °]
List of Machine Parameters
Software Page
version and
behavior
PLC, CN123 6 – 376
280 476-09 6 – 376
PLC, CN123
RUN
PLC, CN123 6 – 373
PLC, CN123 6 – 373
PLC, CN123 6 – 373
280 476-01 6 – 376
PLC, CN123
280 476-01 6 – 376
PLC, CN123
4 – 47