Table of Contents
Advertisement
3.1.3 Shipping Brace for Hard Disk (LE 426 M, LE 430 M)
When is it
necessary to use
the shipping brace?
3 – 6
The hard disks of the LE 426 M and the LE 430 M are fitted with a shipping
brace. The shipping brace consists of two screws, which are used to secure
the hard disk to the housing of the LE. There are also two additional free
threaded holes in the housing, into which the screws are inserted after the
hard disk has been released.
n
Before beginning operation, the shipping brace of the hard disk must be
released and the screws inserted in the storage holes.
n
The shipping brace for the hard disk is not required when the machine is
being transported.
n
Should servicing become necessary (i.e. the LE is being shipped on its own),
the hard disk must be secured with the shipping brace.
HEIDENHAIN Technical Manual TNC 426, TNC 430
Advertisement
Table of Contents
