HEIDENHAIN TNC 426 PB/M Technical Manual page 685

Variable names:
Time management
Name Format type
HOUR Int
MIN Int
SEC Int
DAY Int
MONTH Int
STR_MONTH String
YEAR2 Int
YEAR4 Int
Results or input from the manual measuring cycles in the control data
Name Format type Description
TCH.AXIS String
TCH.PLANEROT Double
TS.RAD Double
TS.LEN Double
TS.OFF1 Double
TS.OFF2 Double
TS.RINGRAD Double
TM.RAD Double
TM.RAD2 Double
TM.LEN Double
TM.OFF1 Double
TM.OFF2 Double
TM.CORSTAT[0] Double
TM.CORSTAT[1] Double
TM.CORSTAT[2] Double
TM.CORDYN[0] Double
TM.CORDYN[1] Double
Results or input from the manual measuring cycles
Name Format type Description
BZ Double
BEZA String
Datum at corner, circle, 4 holes, 3 holes on a circle
Name Format type Description
BZ_HA Double
BZ_NA Double
LKALBEZ Double
HA String
December 2001
Description
No. of hours from real-time clock
No. of minutes from real-time clock
No. of seconds from real-time clock
Day from real-time clock
Month as no. from real-time clock
Month as string abbr. from real-time clock
Two-digit year no. from real-time clock
Four-digit year no. from real-time clock
Selected probe axis
Basic rotation angle
Calibrated probe radius of triggering touch probe
Calibrated probe length of triggering touch probe
Calibrated center offset in reference axis of triggering touch probe
Calibrated center offset in minor axis of triggering touch probe
Calibration ring radius for triggering touch probe
Probe radius 1 of measuring touch probe
Probe radius 2 of measuring touch probe
Calibrated probe length of measuring touch probe
Calibrated center offset in ref. axis of meas. touch probe
Calibrated center offset in minor axis of meas. touch probe
Calibrated stylus bending in X axis of meas. touch probe
Calibrated stylus bending in Y axis of meas. touch probe
Calibrated stylus bending in Z axis of meas. touch probe
Force ratio in X/Z axis of measuring touch probe
Force ratio in Y/Z axis of measuring touch probe
Datum
String datum axis
Datum in reference axis
Datum in minor axis
Datum entered with calibrated probe length
Main axis character
Touch Probe 6 – 355