HEIDENHAIN TNC 426 PB/M Technical Manual page 726

6 – 396
Module 9036 Writing status information
The information to be overwritten is designated with a transferred number.
Number of the
status information
0 to 6
10
11 to 19
Call:
PS B/W/D/K <Number of the status information>
PS B/W7D/K <Value to be written>
CM 9036
PL B/W/D <Error code>
0: Status written
1: Incorrect status code
2: Transferred value out of range
3: Input disabled
Error recognition:
Marker Value Meaning
M4203 0 Status information was written
1 Error code in W1022
W1022 1 Transferred value out of range
2 Incorrect number of the status information
6 Input disabled
Function Value
See
"Handwheel"
Jog increment 0.0001 to 50 mm:
limiting Jog increment limiting
–1; < –2; > 50:
Cancellation of the jog increment
limitation and activation of the jog
increment entered last
–2:
Cancellation of the jog increment
limitation and activation of the
minimum from jog increment
entered last and last limitation
See
"Handwheel"
HEIDENHAIN Technical Manual TNC 426, TNC 430