HEIDENHAIN TNC 426 PB/M Technical Manual page 284

MP Function and input
MP6540 Safety zone around the probe contact of the TT 130 for pre-
positioning
Input:
MP6540.0 Safety clearance in tool axis direction
MP6540.1 Safety clearance in the plane perpendicular to the tool axis 280 474-03
MP6550 Rapid traverse in probing cycle for TT 130
Input:
MP6560 M function for spindle orientation during individual tooth
measurement
Input:
4 – 46
0.001 to 99 999.9999 [mm]
10 to 20 000 [mm/min]
-1: Spindle orientation directly by NC
0: Function inactive
1 to 999: Number of the M function for spindle
orientation by the PLC
HEIDENHAIN Technical Manual TNC 426, TNC 430
Software Page
version and
behavior
PLC, CN123 6 – 372
280 474-03
6 – 372
PLC, CN123 6 – 371
RUN