HEIDENHAIN TNC 426 PB/M Technical Manual page 587

December 2001
Time
HOUR
MIN
SEC
DAY
MONTH
STR_MONTH
YEAR2
YEAR4
Settings for the tool touch probe
TT.RAD
TT.CENTER [3]
TT.PNT1 [3]
TT.PNT2 [3]
TT.PNT3 [3]
TT.PNT4 [3]
Settings for RS-232
RS232.FEBAUD
RS232.EXT1BAUD
RS232.EXT1BAUD
RS232.LSV2BAUD
RS232.MODE
Settings for RS-422
RS422.FEBAUD
RS422.EXT1BAUD
RS422.EXT2BAUD
RS422.LSV2BAUD
RS422.MODE
Display and Operation
Int No. of hours from real-time clock
Int No. of minutes from real-time clock
Int No. of seconds from real-time clock
Int Day from real-time clock
Int Month as no. from real-time clock
String Month as string abbr. from real-time clock
Int Two-digit year no. from real-time clock
Int Four-digit year no. from real-time clock
Double Calibrated radius of TT
Double Calibrated center of TT
Double Calibrated touch point 0 of TT
Double Calibrated touch point 1 of TT
Double Calibrated touch point 2 of TT
Double Calibrated touch point 3 of TT
String Baud rate FE on RS-232
String Baud rate EXT1 on RS-232
String Baud rate EXT2 on RS-232
String Baud rate LSV2 on RS-232
String RS-232 mode
String Baud rate FE on RS-422
String Baud rate EXT1 on RS-422
String Baud rate EXT2 on RS-422
String Baud rate LSV2 on RS-422
String RS-422 mode
6 – 257