HEIDENHAIN TNC 426 PB/M Technical Manual page 556

6 – 226
MP7356 Status window and PLC window
MP7356.0 Background
MP7356.1 Axis positions in the status display
MP7356.2 Status display other than axis positions
MP7357 "Machine" soft-key display
MP7357.0 Background
MP7357.1 Symbols
MP7358 "Programming" soft-key display
MP7358.0 Background
MP7358.1 Symbols
MP7360 Graphics: 3-D view
MP7360.0 Background
MP7360.1 Top surface
MP7360.2 Front face
MP7360.3 Text display in the graphics window
MP7360.4 Lateral face
MP7361 Graphics: Projection in three planes
MP7361.0 Background
MP7361.1 Top view
MP7361.2 Front and side view
MP7361.3 Axis cross and text in the graphic display
MP7361.4 Cursor
MP7362 Additional text display in the graphic window and pocket
calculator
MP7362.0 Background of graphic window and pocket calculator
MP7362.1 Background of status display and keys of the pocket calculator
MP7362.2 Status symbols and symbols of the pocket calculator
(c in "cos")
MP7362.3 Status values and texts of the pocket calculator (os in "cos")
MP7363 Programming graphics
MP7363.0 Background
MP7363.1 Resolved contour
MP7363.2 Subprograms and frame for zooming
MP7363.3 Alternative solutions
MP7363.4 Unresolved contour
MP7364 Color of the help illustrations for cycles
MP7364.0-6 Colors 1 to 7 of the graphic program used
MP7364.7 Line color (color 8 of the graphic program)
MP7364.8 Color for highlighted graphic elements if defined in the help
illustration
MP7364.9 Background
MP7365 Oscilloscope
MP7365.0 Background
MP7365.1 Channel 1
MP7365.2 Channel 2
MP7365.3 Channel 3
MP7365.4 Channel 4
MP7365.5 Selected channel
MP7365.6 Grid
MP7365.7 Cursor and text
HEIDENHAIN Technical Manual TNC 426, TNC 430