HEIDENHAIN TNC 426 PB/M Technical Manual page 686

Datum at corner, circle, 4 holes, 3 holes on a circle
Name Format type Description
NA String
TA String
Calculated straight lines from straight-line probing
Name Format type Description
GE_HA[2] Double
GE_NA[2] Double
GE_WI[2] Double
Calculated radii from circle probing
Name Format type Description
RAD[8] Double
Calculated center points from circle probing
Name Format type Description
MP_HA[8] Double
MP_NA[8] Double
Accumulated touch points from probes
Name Format
type
AP_HA[32] Double
AP_NA[32] Double
AP_TA[32] Double
Example
6 – 356
Minor-axis character
Probe axis character
Straight-line axis section of reference axis
Straight-line axis section of minor axis
Straight-line angle
8 radii
Reference axis of center points
Minor axis of center points
Description
Touch points in reference axis
Touch points in minor axis
Touch points in probe axis
"Calibration of measuring touch probe";
„___________________";
%02.2d-%02.2d-%4d:%02.2d:%02.2d "Time",DAY,MONTH,YEAR4,HOUR,MIN,SEC;
Probe axis:"%s",TA;
Probe radius 1: "%4.3lf" TM.RAD;
Probe radius 2: "%4.3lf",TM.RAD2;
Ring diameter: "%4.3lf",TM.RINGDIA;
Factors: X = "%4.4lf",TM.CORSTA[0];
Y = "%4.4lf",TM.CORSTA[1];
Z = "%4.4lf",TM.CORSTA[2];
Force ratio: FX/FZ = "%4.4lf",TM.CORDYN[0];
FY/FZ = "%4.4lf", TM.CORDYN[1]
HEIDENHAIN Technical Manual TNC 426, TNC 430