Table of Contents
Advertisement
NC software
280 474-12 (export
version 280 475-12)
NC software
280 474-13 (export
version 280 475-13)
NC software
280 474-14 (export
version 280 475-14)
2 – 58
Release: 03/99
Improvements:
n
MP2221: Monitoring the reference pulse of the spindle-speed encoder
n
M4181: NC program selected
n
Input value of the rated frequency in the motor table for asynchronous
motors increased from 999.9 Hz to 2000.0 Hz
n
Module 9175: Error code approach position active
n
Module 9281: Set cursor on a line in the selected pallet table
n
Cycle 207, 17, 18: Maximum input value from Q239 expanded to 99.9999
mm
n
New error number 1068 (Datum table?) for the function FN14: ERROR
Release: 06/99
Improvements:
n
MP340: External interpolation
n
In the manual operating modes, the highest axis feed is stored in D388
n
In the format instructions for the large PLC window, special characters can
be entered with /xYY.
n
With C-axis operation, the bit for the spindle or the axis can be transferred
to modules 9161 and 9162.
n
Module 9035: Axis-specific handwheel superpositioning (M118)
n
Module 9040 and 9041: Reference values with calculated backlash
compensation
n
Module 9044: Spindle coordinates in the form 0.0001°
n
Module 9122: Interrogate whether PLC axis has reached target position
n
Module 9281: Datum shift and datum set can still be carried out, even if the
line is disabled by an entry in LOCK.
n
If a customer-specific company logo is displayed, the control description is
no longer shown.
n
Cycle 17, 18: If an interruption occurs during a tilted working plane, the soft
key MANUAL TRAVERSE appears.
Release: 07/99
Improvements:
n
MP7500: Tilting-axis positioning during datum setting
n
FN17 ID501: Write to REF-referenced datum table
n
FN18 ID501: Read from REF-referenced datum table
n
Module 9189: Shut down the control
HEIDENHAIN Technical Manual TNC 426, TNC 430
Advertisement
Table of Contents
