Table of Contents
Advertisement
6.13.8 Large PLC Window
Mode 1
SMALL
17 lines, 39 columns
0 = y16/x8
MEDIUM
11 lines, 19 columns
0 = y24/x8
LARGE
5 lines, 9 columns
0 = y48/x8
December 2001
Depending on the display mode, the large PLC window can be shown instead
of the graphic/status window, or even over the entire screen. The PLC
window can be combined with the PLC soft keys.
7 7 7 7
Select the display mode with the screen management key or with Module
9202.
7 7 7 7
Define the character size with the special command "charsize = " (See
"Special commands:" on page 6 – 260). The specified position refers to the
lower left corner of the first character.
The content of the PLC window is defined in a screen mask – an ASCII file
containing format instructions and special commands:
7 7 7 7
In Module 9210, enter the name of the screen mask in order to activate the
PLC window.
Display and Operation
Mode 2
SMALL
27 lines, 79 columns
0 = y16/x8
MEDIUM
18 lines, 39 columns
0 = y24/x8
LARGE
9 lines, 19 columns
0 = y48/x8
6 – 255
Advertisement
Table of Contents
