Visual Display Units - HEIDENHAIN TNC 426 PB/M Technical Manual

3.19 Visual Display Unit
LE
LE 426 CB/PB, LE 430 CA/PA to
hardware xxx xxx-3x
LE 426 CB/PB, LE 430 CA/PA from
hardware xxx xxx-4x
LE 426 M, LE 430 M as of
hardware xxx xxx-2x
X43: Visual Display
Unit BC 120
3 – 92
Two display units are available:
n
BC 120, 15-inch color screen
n
BF 120, TFT color flat-panel display
When ordering, make sure that you also order the fitting logic unit for the
screen.
Depending on type of display unit (BC 120 or BC 110B) and LE, an adapter may
be necessary for connecting the screen:
BC 120
Adapter two-row/three-row
Id. Nr.: 313 434-02
No adapter required
No adapter required
The ribbon cable for connecting the display unit soft keys with the TE 420 is
included with the display unit.
Pin layout for the LE 426 CB/PB, LE 430 CA/PA with Id. Nr. xxx xxx-3x, the
adapter, the connecting cable, and the visual display unit:
Note
The interface complies with the requirements of EN 50 178 for "low
voltage electrical separation."
BC 110B
No adapter required
Adapter three-row/two-row
Id. Nr.: 313 434-01
Adapter three-row/two-row
Id. Nr.: 313 434-01
HEIDENHAIN Technical Manual TNC 426, TNC 430