Tool Touch Probe; Further Components - HEIDENHAIN TNC 426 PB/M Technical Manual

TT 130 Tool Touch Probe
Touch-trigger probe for measuring tools.
Id. Nr. 296 537-xx
Id. Nr. 335 332-xx

Further components

Options for TNC 426 CB/PB, TNC 430 CA/PA
Additional position input for a 6th or 9th axis
(350 kHz)
Only TNC 430 PA:
Position input for 3 additional axes with nominal
speed command interface (350 kHz)
Ethernet interface
Digitizing with triggering 3-D touch probe
Digitizing with a measuring 3-D touch probe
(SP 2/1)
Options for TNC 426 M, TNC 430 M
Ethernet interface
Digitizing with triggering 3-D touch probe
Digitizing with a measuring 3-D touch probe
(SP 2/1)
Adapters for encoder signals
TTL (HEIDENHAIN layout)/1 V
TTL (SIEMENS layout)/1 V
11 µA to LE 426 M, LE 430 M
PP
(as of xxx xxx-3x)
11 µA /1 V
PP PP
Documentation
December 2001
TT 130
Adapter cable for
connection to the LE
PP
PP
Items supplied with the control include:
n
1 User's Manual for conversational programming
n
1 User's Manual for ISO programming
n
1 Pilot (brief user's programming guide)
The HEIDENHAIN inverters and motors for the TNC 426 M and the
TNC 430 M are described in the Technical Manual "Inverter Systems and
Motors."
The components required for operating the TNC 426 and TNC 430 with non-
HEIDENHAIN inverter systems are described in the "Technical Information for
Operation of SIMODRIVE and POWER DRIVE inverter systems."
You will receive a set of supplementary pages every time changes are made
to this manual.
Overview of Components
Id. Nr.
311 537-51
294 130-51
293 890-xx
286 405-01
311 647-51
293 890-xx
286 405-01
325 818-51
317 505-01
317 505-02
317 505-05
313 119-01
2 – 21