Table of Contents
Advertisement
M → S:
Special tool follows
a manual tool
December 2001
With this change sequence, two pocket numbers or two tool numbers must
be transferred in succession. M4520 indicates that another TOOL CALL
strobe (M4073) will follow. Regardless of markers M4540 and M4541, the
pocket number –1 and tool number zero are transferred first.
Tool number zero means clear the spindle!
Pocket number –1 means: no pocket in the tool magazine!
7 7 7 7
Acknowledge with M4093.
Then the pocket number and tool number of the new, called tool are
transferred.
Tool Changer
6 – 439
Advertisement
Table of Contents
