Table of Contents
Advertisement
Cam table shift
The created cam pattern is defined with a phase of 0% to 100%, but the actual operation may
differ in phase from the reference of the cam pattern. The cam table shift is a function to set
the percentage of the created cam pattern for the phase at a current coordinate position of
zero.
Shift image of electronic cam
Cam pattern
example
• Cycle: 1000
• Resolution:
1024
-100 0
0
Select the shift from "Interval" and set the shift amount.
The created cam pattern moved by 10% with the display updated.
Before change
After change
Storage of cam tables
Created cam tables can be automatically saved by pressing the [OK] button on the cam table
setting screen. Saved cam tables are managed by FPWIN GR7, and set by downloading to
control units.
• In the case of setting coordinate 0 to 0% phase (0/1024).
To what value
the phase of
coordinate 0 is
set?
• In the case of setting coordinate 0 to 80% phase (819/1024).
Current
coordinate position
after the clutch.
100 0
-100 0
12.6 Electronic Cam Function
-100 0
0
0
８１９/１０２４
Current
coordinate
system after
100 0
the clutch.
Current
coordinate
system after
100 0
the clutch.
12-31
Advertisement
Table of Contents
