Setting Of Position Control Parameters; Axis Allocation For Use; Settings In Configurator Pm7 - Panasonic FP-XH M8N16PD User Manual

Setting of Position Control Parameters

9.1 Axis Allocation for Use

9.1.1 Settings in Configurator PM7

Assign all channels to be used and their usage via the FPWIN GR7. The following steps are
performed with the Configurator PM7 that has been started as a premise.
PROCEDURE
1. Select "Options"→"Positioning Table Settings" from the menu bar. Or
double-click the "Positioning table" from the project tree.
The "Configurator PM7" configuration menu is started.
2. Select "Axis Settings"→"Change Axis" from the menu bar.
The dialog box of for setting of the axis to be used appears.
3. When using the virtual axes for the synchronous control, select from the
drop-down list.
When selecting V-Axis 1, "Axis 8" changes to "V-Axis 1". When selecting V-Axis 1
through V-Axis 2, "Axis 7" changes to "V-Axis 1", and "Axis 8" changes to "V-Axis
2".
4. Select the axis to be used and click [OK].
The dialog box for setting interpolation operation group appears.
9-2