19.4 Table of Warning Codes
19.4.1 AMP Warnings (A000H - )
• Warnings occurred on the AMP side are output on the FP-XH M8N Control Unit side as
warning codes.
• The warning codes output from this unit are written in hexadecimal, however, the warning
codes output from the AMP are written in hexadecimal when using A6N/A5N.
• The AMP warnings differ depending on the types of AMP. For details of the processing for
AMP warnings, refer to the manual of servo amplifiers.
How to read AMP warning codes [For A6N/A5N]
The warning numbers of AMP are obtained by subtracting A000H from the warning codes of
this unit.
Example) When an overload protection occurred;
Warning code of this unit: A0A0 H
↓
Subtract A000H from the warning code: 00A0 H
↓
Warning number of AMP: A0 H
19.4 Table of Warning Codes
19-25