Table of Contents
Advertisement
Transfer to Unit and
Commissioning
10.4.5 Positioning by Tool Operation Function
Specifying a starting table number enables to check if positioning from the starting table
operates properly.
PROCEDURE
1. Select "Online" → "Tool Operation" from the menu bar.
The "Tool Operation" dialog box is displayed.
2. Select "Positioning" from the "Tool Operation" dialog box.
The "Tool operation – Positioning" dialog box is displayed.
3. Press the [Change] button under the target start table number field.
The starting table no. setting dialog box is displayed.
4. Enter the starting table number.
5. Press the [Operation] button.
Positioning starts from the specified start table number.
6. Press [Exit] button to terminate the positioning operation.
10-16
Advertisement
Table of Contents
