Panasonic FP-XH M8N16PD User Manual page 76

I/O Allocation
Contact Target
allocation axis
Y1380 Axis 1
Y1381 Axis 2
Y1382 Axis 3
Y1383 Axis 4
Y1384 Axis 5
Y1385 Axis 6
Axis 7
Y1386
(virtual)
Axis 8
Y1387
(virtual)
Y1388
-
-Y138F
Y1390 Axis 1
Y1391 Axis 2
Y1392 Axis 3
Y1393 Axis 4
Y1394 Axis 5
Y1395 Axis 6
Axis 7
Y1396
(virtual)
Axis 8
Y1397
(virtual)
Y1398
-
-Y139F
Y1400
-
-Y140F
Y1410
-
-Y141F
(Note 1): When using the virtual axes, the I/O numbers allocated vary according to the number of virtual axes.
When selecting virtual 1st
axis
When selecting virtual 1st
and 2nd axes
3-28
Name Description
Changes the target speed by turning on the contact for the
Positioning speed
corresponding axis during the positioning operation.
change request
(The operation is the edge type.)
- -
Positioning
Changes the target movement amount by turning on the contact
movement
for the corresponding axis during the positioning operation.
amount change
(The operation is the edge type.)
request
- -
- -
- -
The I/O number of "Axis 8 (virtual)" in the above table is allocated to "virtual
1st axis".
The I/O number of "Axis 7 (virtual)" in the above table is allocated to "virtual
1st axis".
The I/O number of "Axis 8 (virtual)" in the above table is allocated to "virtual
2nd axis".