Cam Pattern Settings - Panasonic FP-XH M8N16PD User Manual

9.3.2 Cam Pattern Settings

Use the Configurator PM7 to allocate the electronic cam setting. The following steps are
performed with the Configurator PM7 that has been started as a premise.
PROCEDURE
1. Select "Axis Setting"→"Cam pattern Setting" from the menu bar.
The dialog box for cam pattern settings appears.
2. Set the necessary parameters according to the purpose and press [OK].
3. Select "File"→"Apply Setting" from the menu bar.
The parameters set in Configurator PM7 are applied as the project data being
edited.
REFERENCE
For setting of synchronous control parameters, please refer to "Chapter 12 Automatic
Operation (Synchronous Control)".
KEY POINTS
• The saved parameters can be read on the Configurator PM7.
During synchronous control, basic input and output parameters will also
•
operate according to "9.2 Parameter settings".
9.3 Synchronous Parameter / Cam Pattern Settings
9-9