Wiring of Power Supply and General-purpose I/O Parts
5.4 Wiring of Terminal Block
5.4.1 Suitable Wires
Suitable wires
Applicable wires
2
AWG22-14 (0.3 mm
-2.0 mm
Supplied terminal block
• M3 terminal screws are used for the terminals. Please use the following crimp terminals to
connect terminals.
• When using round terminals, remove the terminal block cover before operating.
Fork type terminal
6mm
or less
3.2mm or more
5.4.2 Terminal Block Cover
• When using round terminals, remove the terminal block cover before operating.
•
To prevent electric shock, make sure to install the terminal block outer
cover as is after wiring.
5-12
Tightening
torque
2
)
0.5 - 0.6 N ⋅ m
Ring type terminal
6mm
or less
3.2mm or more