Table of Contents
Advertisement
Steps Before Running
Download steps
Use the following steps to download the program data. Explain it as below assuming that the
FPWIN GR7 has been started.
PROCEDURE
1. Select "Online" → "Switch to Online Mode" from the menu bar.
2. Select "Online"→"Download to PLC" (Entire Project) from the menu bar.
The confirmation dialog box is displayed.
4. Click the [Yes] button.
Perform the download. In addition, the information dialog box for confirming
whether to switch the mode displays.
5. Click [Yes] or [No] button.
Click "Yes" to switch to RUN mode. Click "No" to switch to monitoring mode.
KEY POINTS
•
When you switch to RUN mode, switch it after confirming that there will be
no danger even the PLC is in motion.
•
When you switch to RUN mode, the ERR LED lights up after an error occurs,
and then return to PROG. mode. Please refer to "20.2 What to Do If an Error
Occurs".
8-8
Advertisement
Table of Contents
