Panasonic FP-XH M8N16PD User Manual page 242

Automatic Operation (Synchronous Control)
 Procedure of rewriting cam pattern data
Step Operation by user programs and unit operation
Store necessary setting parameters in the cam pattern editing area.
 Rewriting cam pattern number
 No. of sections: following parameters in sections 1 to n (n is a specified number of sections.)
①
 Start phase
 Displacement
 Cam curve number
②
Turn on the came table rewriting request (Y1103) from a ladder program.
On the completion of rewriting, turn on the cam pattern rewriting completion annunciation (X1103) after
③
storing a response code in "Cam table rewriting result".
Once the cam table rewriting request (Y1103) turns off, the unit turns off the cam pattern rewriting
④
completion annunciation flag (X1103).
Store necessary setting parameters
in the cam pattern editing area.
Cam table
parameters
Cam table rewriting request
(Y1103)
Cam table rewriting done
annunciation (X1103)
Cam table rewriting result
 Related positioning parameter
Offset
Area
address
Cam pattern
editing area
59H
（No.3）
12-34
●Cam pattern editing area
Cam pattern edit no.
No. of sections
Sections 1 to n Start phase
Displacement
Cam curve no.
Request ON after storing the parameters
ON
OFF
ON
OFF
Name Default
Cam pattern
rewriting H0
result
0000h (Nomal completion)
Description
・Stores the result of rewriting processing
(response code).
[Range] (Hexadecimal)
0000H: Normal end
Other than 0000H: Abnormal end