Table of Contents
Advertisement
AMP monitor & control area
Offset
Name
address
H390
AMP ID number
H391
Control flag
H392
Status
H393
Reserved for system
H394
Monitor data
H395
H396～
Reserved for system
H39F
(Note): For the type codes, refer to "17.14 AMP Monitoring Function".
Default
Description
Specify the target axis number (AMP ID no.) to monitor AMP
parameters.
K1
Setting range: K1-K8
Specify the type code of the item to be monitored. (Note)
The FP-XH M8N control unit executes the monitoring
H0
processing requested by the flag after detecting the change of
this flag from H0 to Hxx. The unit changes the flag to H0 (no
request) simultaneously with the completion of the processing.
Stores the processing state of the AMP monitor. The FP-XH
M8N control unit changes this area to H1 simultaneously with
the start of the processing. After that, it stores the processing
result and change the control flag to H0.
H0: No operation
H0
H1: Being processed
H2: Normal end
H3: Abnormal end
H4: ID error (AMP ID no. unconnected)
H5: Disabled (Network is disconnected, etc.)
－
－
Stores the monitoring result of the requested monitoring item.
－
－
－
26.4 Positioning Memory
26-31
Advertisement
Table of Contents
