System Errors (1000H - ) - Panasonic FP-XH M8N16PD User Manual

Error/Warning Annunciation Function

19.3.2 System Errors (1000H - )

The followings are errors occurred due to internal abnormalities of the unit. The system error
is defined as the error that has a fatal effect on the system. Except for some items,
reconnecting the power is necessary for the recovery of system error.
Code Name
System
1000H
crash
Hardware
1001H
error
1002H Unit error
System
1003H
processing
error
System start
1015H
error
Tools
running
1020H
Abnormal
completion
Control unit
1030H
error
Control unit
Abnormal
1031H
operation
mode
19-14
Description
System crash
Error occurred during the
hardware test with the power
ON
Some errors occurred during
internal processing
System processing error
caused by some reasons
Reading positioning setting
data failed at the time of the
system startup.
Error occurs in the
communication with the
computer when performing
tools running via the position
control setting menu of
programming tool.
ALARM occurs in control unit
Switch the control unit to PROG
mode and the operation stops
Object Recovery
All axes ×
All axes ×
All axes ×
All axes ○
All axes ×
All axes ○
All axes ×
All axes ○
Measures
Reconnect the power.
If this error continues, please
contact our company.
Check the settings.
If this error continues while there
are no abnormal settings, please
contact our company.
Turn off the power supply and turn
it on again.
If an error occurs repeatedly,
consult your Panasonic
representative.
Confirm the cable connection
between computer and PLC.
Restart the computer.
Confirm the state of the control unit.
Reconnect the power.
Confirm the state of the control unit.
Set the control unit as RUN mode.