Table of Contents
Advertisement
Offset
Name
address
Software limit
HB
enabled/disabled
setting
Upper limit of
HC-HD
software limit
Lower limit of
HE-HF
software limit
Default
Setting range and description
Enables or disables the software limit on each control.
bit
0
1
H0
2
15-3
Set the upper limit of the software limit for absolute coordinates.
Range:‐2,147,482,624 to 2,147,482,624
Any other settings will be errors.The ranges vary depending on
the unit settings as below.
pulse: ‐2,147,482,624 to 2,147,482,624 pulse
K2147482624
μm (0.1 μm):‐214,748,262.4 to 214,748,262.4 μm
μm (1 μm): ‐2,147,482,624 to 2,147,482,624 μm
inch (0.00001 inch): ‐21,474.82624 to 21,474.82624 inch
inch (0.0001 inch): ‐214,748.2624 to 214,748.2624 inch
degree (0.1 degree): ‐214,748,262.4 to 214,748,262.4 degree
degree (1 degree): ‐2,147,482,624 to 2,147,482,624 degree
Set the lower limit of the software limit for absolute coordinates.
Range: ‐2,147,482,624 to 2,147,482,624
Any other settings will be errors.The ranges vary depending on
the unit settings as below.
pulse: ‐2,147,482,624 to 2,147,482,624 pulse
K-2147482624
μm (0.1 μm):‐214,748,262.4 to 214,748,262.4 μm
μm (1 μm): ‐2,147,482,624 to 2,147,482,624 μm
inch (0.00001 inch): ‐21,474.82624 to 21,474.82624 inch
inch (0.0001 inch): ‐214,748.2624 to 214,748.2624 inch
degree (0.1 degree): ‐214,748,262.4 to 214,748,262.4 degree
degree (1 degree): ‐2,147,482,624 to 2,147,482,624 degree
Name
Default
Enable/disable
0
the software
limit in the
positioning
control.
Enable/disable
0
the software
limit in the
home return
Enable/disable
0
the software
limit in JOG
operation
－
－
26.4 Positioning Memory
Description
0: Disables the software limit
in positioning control
1: Enables the software limit
in positioning control
0: Disables the software limit
in home return.
1: Enables the software limit
in home return.
0: Disables the software limit
in JOG operation.
1: Enables the software limit
in JOG operation.
－
26-37
Advertisement
Table of Contents
