Panasonic FP-XH M8N16PD User Manual page 423

 Setting to allow access with a password
1. Select [Tools] → [PLC Security Settings] → [Set PLC Password] from the menu bar.
The "Set PLC Password" dialog box is displayed.
2. Set the items in the table below, click [Set] button.
Item
Digits
Operation mode
4, 8, 32-digit password
When allowing access, the following information is displayed.
3. Click the [OK] button.
• When the " Access" status stays unchanged, if the PLC power supply is set
to OFF / ON, it will become password protection status again.
Settings
Please set the digits.
Select "Access".
Enter a set password.
22.1 Password Protection Function
22-5