Table of Contents
Advertisement
Specifications
(Note 1): No. 412: when you select a computer link or MODOBUS RTU in the communication mode, the No. 413
transmission format and No. 415 baud rate can be set.
(Note 2): No. 412: when selecting only the general-purpose communication in the communication mode, you can set
no. 413: transmission format terminal selection, end and start codes. In addition, when selecting the terminal as
time only through no. 413, you can select no. 424 to no. 427.
(Note 3): The PC (PLC) link function is only available for COM0 or COM1 port. Data length for transmission format: 8
bits,
Parity: odd, stop bit: fixed to 1. In addition, select the communication speed in PC link W0-0 system register No.
48 item.
(Note 4): The COM4 port only supports MEWTOCOL-COM communication. In addition, the communication
parameters (unit number, communication format, baud rate) when the power is ON are same as the settings of
the COM3 port. After RUN, you can also change the conditions by SYS1 instruction.
No.
Time constant setting of CPU
430
1
X0-X3
Time constant setting of CPU
431
1
X4-X7
26-64
Name
Initial value
No
Sets value range and description
No
1 ms
2 ms
4 ms
8 ms
16 ms
32 ms
64 ms
128 ms
256 ms
Advertisement
Table of Contents
