Table of Contents
Advertisement
Dialog box items
Item
Description
When set as the master axis, "Master" will be displayed.
When set as the slave axis, the master axis based on such axis will be
Synchronous
displayed. E.g.) When the axis 2 is set to be a slave following the axis 1
master axis
as the master, "Axis 1" will be displayed in the line of Axis 2".
Axes not used for synchronized control will be displayed as [--------].
Displays the synchronous running function set to the slave axis.
Gear, clutch, cam
Gear＋Clutch, Gear＋Cam, Clutch＋Cam
Synchronized
output
Gear＋Clutch＋Cam
Axes not used for master axis and synchronized control will be displayed
as [--------].
Displays the set status (synchronous/non-synchronous) of each axis.
Synchronous
Pressing the "Change synchronization" button switches the state between
state
Synchronous and Asynchronous.
Monitors the feedback values of various axes after unit conversion. Press
Current value
the [Update Current Value] button to display the value input dialog box,
which allows change of the current value.
Displays the unit of the position command of each axis set in parameter
Unit
settings.
JOG target
Monitors and displays the target speed of JOG operation. Click the
speed
[Change] button to change the target speed of JOG operation.
JOG [+]
Click the [+] button to execute JOG forward running.
Click the [-] button to execute JOG backward running.
JOG [−]
Displays the operation state of each axis.
"Operating" (green): The motor is running.
Axis state
"Stopped" (gray): The motor stops.
"Error" (red): An error occurs.
The latest error code is displayed in case of an error.
Error code
If a recoverable error occurs in the control, click the [Clear errors] button
to clear the error.
The latest warning code is displayed in case of a warning.
Warning code
Click [Clear warning] to clear the warning.
It allows setting the target speed of JOG operation of different axes set in
Speed rate
parameter settings as 100% to specify the speed multiplier operation.
Click the [Speed Rate] button to display the value input dialog box.
10.4 Tool Operation
Related Page
12.1
Synchronous
Control
17.5 Current
Value Update
13.1 Setting
and Operation
of JOG
Operation
19.3 Table of
Error Codes
19.4 Table of
Warning Codes
10-13
Advertisement
Table of Contents
