Table of Contents
Advertisement
Automatic Operation (Synchronous Control)
KEY POINTS
•
The resolution is valid for all cam patterns. It is not allowed to set the
resolution of each cam pattern separately.
•
Number of cam patterns available for setting depends on the resolution.
When changing the resolution, if the set number of cam patterns exceeds
the number of cam patterns available for setting after the resolution is
changed, the resolution will not be changed. Please delete the cam patterns
and change the resolution again.
Creating/copying cam patterns
Click the [Add] button in the "Cam" field to start the cam no. selection menu.
Select the cam no. and click the [OK] button.
Cam patterns can also be copied. Click [Copy] to select the target and source cam pattern no.
To change the cam no., click the [Change] button and select the changed cam no.
Note) A cam pattern no. that has been set cannot be set.
12-26
Advertisement
Table of Contents
