Panasonic FP-XH M8N16PD User Manual page 180

Transfer to Unit and
Commissioning
 Sample program
It represents the situation when axis-4 elapsed value (current value) is read into the data
registers DT300-DT301.
Instruction Reference
R0
F384 PTBLR
 Current value and unit converted into the current value
Offset Address Description
Unit: Pulse
The current value based on the mechanical origin and is saved in the unit of pulse. reset to
H3C
"0" upon home return. The value will not be updated even if the Update Current Value
function is executed.
Unit: pulse/µm/inch/degree
Saves the current value based on the electrical origin. Save the value converted to the
selected unit system (pulse, µm, inch and degree) in the setting area of different axes. After
H3E
home return, the values set as the coordinate origin will be saved. It will be reset to "0"
when the value saved in the coordinate origin is "0". This area will be updated when using
the Update Current Value function.
10-22
For details about the instructions, please refer to "Chapter 18
".
H301 H3C K2 DT300