Home Return By Tool Operation Function - Panasonic FP-XH M8N16PD User Manual

Transfer to Unit and
Commissioning

10.4.4 Home Return by Tool Operation Function

• When the power is turned on, the coordinates of the control unit do not coincide with those of
the machine position. Execute a home return before starting positioning.
• You can perform commissioning with the Configurator PM7 before actually starting the user
program..
• The following procedure is explained on the condition that the Configurator PM7 has already
started.
PROCEDURE
1. Select "Online" → "Tool Operation" from the menu bar.
The "Tool Operation" dialog box is displayed.
2. Select "Home Return" from the Tool Operation dialog box.
The "Tool operation - Return to home position " dialog box is displayed.
3. Click the [Start] button of the axis to be subject home return.
It executes home return.
4. Press [Exit] button to terminate the home return operation.
KEY POINTS
This dialog box cannot be closed during the operation.
•
10-14