Panasonic FP-XH M8N16PD User Manual page 67

Contact Target
allocation axis
X1390 Axis 1
X1391 Axis 2
X1392 Axis 3
X1393 Axis 4
X1394 Axis 5
X1395 Axis 6
Axis 7
X1396
(virtual)
Axis 8
X1397
(virtual)
X1398
-
-X139F
X1400
-
-X140F
X1410
-
-X141F
(Note 1): When using the virtual axes, the I/O numbers allocated vary according to the number of virtual axes.
When selecting virtual 1st
axis
When selecting virtual 1st
and 2nd axes
3.4 Detailed I/O Information of Motion Control Part
Name Description
Positioning
Starts the movement amount change operation when the
movement
positioning movement amount change request contact (Y1390 to
amount change
Y139F) turns ON. The contact for the corresponding axis turns
request reception
ON when he request is accepted.
annunciation
- -
- -
- -
The I/O number of "Axis 8 (virtual)" in the above table is allocated to "virtual
1st axis".
The I/O number of "Axis 7 (virtual)" in the above table is allocated to "virtual
1st axis".
The I/O number of "Axis 8 (virtual)" in the above table is allocated to "virtual
2nd axis".
3-19