Sbus<N>:Spi:source:miso - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

27
:SBUS<n> Commands
:SBUS<n>:SPI:SOURce:MISO
Command Syntax
:SBUS<n>:SPI:SOURce:MISO <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:SPI:SOURce:MISO command sets the source for the SPI
serial MISO data.
Query Syntax
:SBUS<n>:SPI:SOURce:MISO?
The :SBUS<n>:SPI:SOURce:MISO? query returns the current source for the
SPI serial MISO data.
Return Format
<source><NL>
See Also •
•
•
•
•
•
•
•
•
746
(see page 1138)
"Introduction to :TRIGger Commands"
":SBUS<n>:SPI:SOURce:MOSI"
":SBUS<n>:SPI:SOURce:DATA"
":SBUS<n>:SPI:SOURce:CLOCk"
":SBUS<n>:SPI:SOURce:FRAMe"
":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA"
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA"
":SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh"
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 877
on page 747
on page 1092
on page 744
on page 745
on page 748
on page 750
on page 749
on page 751