Sbus<N>:A429:Base - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SBUS<n>:A429:BASE
Command Syntax
:SBUS<n>:A429:BASE <base>
<base> ::= {BINary | HEX}
The :SBUS<n>:A429:BASE command selects between hexadecimal and
binary display of the decoded data.
The BASE command has no effect on the SDI and SSM fields, which are
always displayed in binary, nor the Label field, which is always displayed
in octal.
Query Syntax
:SBUS<n>:A429:BASE?
The :SBUS<n>:A429:BASE? query returns the current ARINC 429 base
setting.
Return Format
<base><NL>
<base> ::= {BIN | HEX}
Errors
•
See Also
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:MODE" on page 649
":SBUS<n>:A429:FORMat"
on page 1169
on page 645
on page 657
28
:SBUS<n> Commands
653