Features; Physical Dimensions; Led Display - Dell EMC PowerSwitch Z9100–ON Installation Manual

Hide thumbs Also See for EMC PowerSwitch Z9100–ON:

Table of Contents

Figure 3. Z9100–ON PSU-side view

1. Fan modules

2. Power supply units

Features

The Z9100–ON offers the following features.

● QSFP ports support 10/25/40/50/100 GbE

● Two 1000M/10G SFP+ ports

● One micro universal serial bus (MicroUSB-B) console port

● One 2.0 USB Type-A port for additional file storage

● One 10/100/1000BaseT Ethernet management port

● Rangeley central processing unit (CPU) system with 8GB DDR III RAM.

● Temperature monitoring

● Software-readable thermal monitor

● Real time clock (RTC) support

● Two hot-pluggable redundant power supplies

● Power management monitoring

● Five removable fans

● Standard 1U chassis

The Z9100-ON has the following physical dimensions:

● 434 x 462 x 44 mm (W x D x H)

● 17.1 x 18.2 x 1.72 inches (W x D x H)

● Handle: 40 mm (1.57 inches)

The Z9100–ON includes LED displays on the I/O side of the switch. This section describes open networking installation

environment (ONIE) LED behaviors. Some LED behaviors may change after you install your software.

NOTE:

If you are installing third-party software, for LED information, see your third-party operating software

documentation.

The Z9100–ON switch

Table of Contents