System Status; Led Display; Led Behavior - Dell EMC PowerSwitch S6100-ON Installation Manual

System status

You can view S6100–ON status information using the LEDs.

LED display

The S6100–ON includes LED displays on the I/O side of the system.
NOTE: If you are installing third-party software, for LED information, see your third-party operating software
documentation.

LED behavior

The following S6100–ON system LED behavior is seen during open networking installation environment (ONIE) operations:
Figure 5. S6100–ON LEDs
1. Fan LED
3. Master LED
5. Locator LED
7. System LED
9. Stack ID LED
Table 1. S6100–ON LED behavior
LED
System Status and Health LED
Power LED
2. Power LED
4. System LED
6. Locator LED
8. Port LEDs
10. RJ-45 Ethernet Management Port LED
Description
● Off—No power
● Solid green—Normal Operation
● Blinking green—POST is in process
● Solid amber—Critical system error
● Blinking amber—Minor system error
● Off—No power
● Solid green—Normal Operation
● Solid amber—POST is in process
● Blinking amber—Noncritical system error—power supply
failure
S6100–ON system 9