Displaying And Maintaining Ipv6 Netstream - H3C SR6600-X Configuration Manual

Step
4. (Optional.) Specify the
source interface for IPv6
NetStream data packets
sent to the NetStream
servers.
5. Enable the IPv6
NetStream aggregation.

Displaying and maintaining IPv6 NetStream

Execute display commands in any view and reset commands in user view.
Task
Display IPv6 NetStream entry information
in the cache (in standalone mode).
Display IPv6 NetStream entry information
in the cache (in IRF mode).
Display information about the IPv6
NetStream data export.
Display the configuration and status of
the IPv6 NetStream templates (in
standalone mode).
Display the configuration and status of
the IPv6 NetStream templates (in IRF
mode).
Age out, export all IPv6 NetStream data,
and clear the cache.
Command
ipv6 netstream export source interface
interface-type interface-number
enable
Command
display ipv6 netstream cache [ slot slot-number ] [ verbose ]
display ipv6 netstream cache [ chassis chassis-number slot
slot-number] [ verbose ]
display ipv6 netstream export
display ipv6 netstream template [ slot slot-number ]
display ipv6 netstream template [ chassis chassis-number slot
slot-number ]
reset ipv6 netstream statistics
235
Remarks
By default, no source interface is
specified for IPv6 NetStream
data packets. The packets take
the primary IPv6 address of the
output interface as the source
IPv6 address.
You can configure different
source interfaces in different
IPv6 NetStream aggregation
mode views.
If no source interface is
configured in IPv6 NetStream
aggregation mode view, the
source interface configured in
system view applies.
By default, the IPv6 NetStream
aggregation is disabled.