Console Port Login Configuration With Authentication Mode Being Scheme - H3C S5500-EI series Operation Manual

Operation Manual – Login
H3C S5500-EI Series Ethernet Switches
2.6 Console Port Login Configuration with Authentication
Mode Being Scheme
2.6.1 Configuration Procedure
To do...
Enter system view
Configu
re the
authenti
cation
mode
Create a local user
(Enter local user
view.)
Set the
authentication
password for the
local user
Specify the service
type for AUX users
Quit to system view
Enter AUX user
interface view
Configure to
authenticate users
locally or remotely
Use the command...
system-view
Enter the
default
ISP domain Domain name
domain
view
authentication
default { hwtacacs-
Specify
the AAA scheme
scheme hwtacacs-scheme-na
to be me [ local ] | local |
applied to none |
the radius-scheme
domain radius-scheme-name
[ local ] }
Quit to
system quit
view
local-user user-name
password { simple |
cipher } password
service-type
terminal [ level level ]
quit
user-interface aux 0
authentication-mode
scheme [ command-
authorization ]
Chapter 2 Logging In Through the Console Port
—
Optional
By default, the local AAA scheme is
applied. If you specify to apply the
local AAA scheme, you need to
perform the configuration
concerning local user as well.
If you specify to apply an existing
scheme by providing the
radius-scheme-name argument,
you need to perform the following
configuration as well:
Perform
configuration on the switch.
(Refer
AAA-RADIUS-HWTACACS
module for more.)
Configure the user name and
password accordingly on the
AAA server. (Refer to the user
manual of AAA server.)
Required
No local user exists by default.
Required
Required
—
—
Required
The specified AAA scheme
determines whether to authenticate
users locally or remotely.
Users are authenticated locally by
default.
2-14
Remarks
AAA-RADIUS
to the