Configuring Mac-Based Quick Portal Authentication; Restrictions And Guidelines For Configuring Mac-Based Quick Portal Authentication; Configuring A Mac Binding Server - H3C SR8800-F Configuration Manual

Step
4. Return to system view.
5. Enter interface view.
6. Specify the NAS-ID profile on
the interface.
Configuring MAC-based quick portal
authentication
Restrictions and guidelines for configuring MAC-based quick
portal authentication
Only IPv4 direct authentication supports MAC-based quick portal authentication.
Do not configure both a MAC binding server and a portal preauthentication policy on an interface.
Otherwise, the MAC binding server does not take effect.

Configuring a MAC binding server

You can configure multiple MAC binding servers on the device.
Perform this task to configure MAC binding server parameters, such as the server's IP address and
the free-traffic threshold.
To configure a MAC binding server:
Step
1. Enter system view.
2. Create a MAC binding server
and enter its view.
3. Specify the IP address of the
MAC binding server.
4. (Optional.) Specify the
free-traffic threshold.
5. (Optional.) Specify the
NAS-Port-Type value carried
in RADIUS requests sent to
the RADIUS server.
6. (Optional.) Set the UDP port
number on which the MAC
binding server listens for
MAC binding query packets.
7. (Optional.) Specify the
maximum number of
attempts and the interval for
sending MAC binding
queries to the MAC binding
server.
Command
quit
interface interface-type
interface-number
portal nas-id-profile
profile-name
Command
system-view
portal mac-trigger-server
server-name
ip ipv4-address [ vpn-instance
ipv4-vpn-instance-name ] [ key
{ cipher | simple } string ]
free-traffic threshold value
nas-port-type value
port port-number
binding-retry { retries | interval
interval } *
325
Remarks
N/A
N/A
By default, no NAS-ID profile is
specified on the interface.
Remarks
N/A
By default, no MAC binder servers
exist.
By default, the IP address of a
MAC binding server is not
specified.
By default, the free-traffic
threshold is 0 bytes.
By default, the NAS-Port-Type
value carried in RADIUS requests
is 0.
By default, the MAC binding
server listens for MAC binding
query packets on UDP port
50100.
By default, the maximum number
of query attempts is 3 and the
query interval is 1 second.