Info) Id (Circuit Id); Info) 1:1 (1:1 Redundancy Information); Save/Load; Save/Load) Save - Comtech EF Data CDM-570 Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Front Panel Operation
6.16.10

(INFO) ID (Circuit ID)

This displays the user-defined Circuit ID string, which is entered via the UTIL, ID
screen. To return to the previous menu, press ENTER.
Circuit ID:
24 CHARACTER TST MESSAGE
6.16.11

(INFO) 1:1 (1:1 Redundancy information)

Redundancy State:Standby
Serial 1:1 Link: Active
This screen shows the following:
Redundancy status - either Online or Standby (1:1 or 1:N)
1:1 link status - this shows the status of the serial link between the two units –either
Active or Idle.
Pressing ENTER or CLEAR takes the user back to the previous menu.
6.17

SAVE/LOAD

Save/Load Configuration:
Save
Select Save or Load using the
These sub-menus permit the user to store or load up to 10 different modem configurations
in the non-volatile memory of the modem (0 through 9).
6.17.1

(SAVE/LOAD) SAVE

Selecting Save will display the following screen, if the selected location is empty:
Save Config to Loc: 9
Empty
However, if the location already contains data, the following screen will be displayed:
(ENTER)
(◄ ►,ENTER)
Load
◄ ►
(▲ ▼)
arrow keys, then press ENTER.
6–54
Revision 3
MN/CDM570L.IOM