Figure 7-126. Interface Settings Page - Supermicro SuperBlade Series User Manual

Superblade Network Modules User's Manual
Table 7-98. OSPFv3 Basic Settings Page Parameters (Continued)
Parameter
External LSDB Limit
Exit Overflow Interval
Demand Extension
Reference Bandwidth
SPF Delay
SPF Hold Time
Default Passive Interface
Trace Level
Interface
Clicking the I
NTERFACE
parameters for this page are shown in
Description
This parameter specifies maximum number of non-default
AS-external-LSAs entries that can be stored in the link-state database.
This parameter specifies the time interval in seconds a router will attempt
to leave OverflowState.
This parameter indicates the router's support for demand routing.
This parameter specifies Reference bandwidth in kilobits/seconds, for
calculating default interface metrics.
This parameter indicates the delay in routing calculation after a topology
change.
This parameter specifies the minimum time between two consecutive SPF
calculations.
This parameter specifies whether all the OSPFv3 interfaces created after
this setting are passive or not.
This parameter defines the level of trace required for OSPFv3.

Figure 7-126. Interface Settings Page

tab brings up the I
Table
7-142
S
NTERFACE ETTINGS
7-99.
page (Figure 7-126). The