Rip6; Rip6 Interface Statistics; Rip6 Route Information; Figure 7-195. Rip6 Interface Statistics Page - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
RIP6
The RIP6 link allows you to view RIP6 statistics through the following pages:
•
"RIP6 Interface Statistics" on page 7-227
•
"RIP6 Route Information" on page 7-228
RIP6 Interface Statistics
Clicking the I
NTERFACE
(Figure
7-195), which displays RIPng statistics. The parameters for this page are shown
in
Table
7-163.
Table 7-163. RIP6 Interface Statistics Page Parameters
Parameter
Interface ID
In Msg
In Req
In Resp
In Unk-Cmd
In Other-Ver
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Figure 7-195. RIP6 Interface Statistics Page
S
tab brings up the RIP6 I
TATISTICS
Description
This parameter specifies the interface identifier.
This parameter specifies the number of RIPng packets received.
This parameter specifies the number of RIPng request packets received.
This parameter specifies the number of RIPng resonse packets received.
This parameter specifies the number of RIPng unknown command packets
received.
This parameter specifies the number of RIPng other version packets
received.
7-227
S
NTERFACE
TATISTICS
page
Advertisement
Table of Contents
