Interface Settings; Figure 7-109. Dhcp Relay Interface Configuration Page; Table 7-83. Dhcp Relay Interface Configuration Page Parameters - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Interface Settings
Figure 7-109. DHCP Relay Interface Configuration Page
Clicking the I
NTERFACE
page
(Figure
7-109), which allows you to configure the DHCP relay for VLANs. The
parameters for this page are shown in
Table 7-83. DHCP Relay Interface Configuration Page Parameters
Parameter
VLAN Interface
Circuit ID
Remote ID
Chapter 7: Layer 2/3 Ethernet Switch Firmware
C
tab brings up the DHCP R
ONF
Table
Description
This parameter specifies the VLAN Interface name.
This parameter specifies the DHCP Relay Circuit identifer.
This parameter specifies the Remote identifer.
7-123
I
ELAY
NTERFACE
7-83.
C
ONFIGURATION
Advertisement
Table of Contents
