Figure 7-23. Ip Standard Acl Configuration Page - Supermicro SuperBlade Series User Manual
Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Table of Contents
Advertisement
Superblade Network Modules User's Manual
Table 7-11. MAC ACL Configuration Page Parameters (Continued)
Parameter
Action
Priority
VLAN ID
Port List (Incoming)
Encapsulation
Protocol
IP Standard ACL
Clicking the IP S
(Figure
7-23), which displays the various ACL (Access Control List) parameters to
configure the Standard IP access lists. The parameters for this page are shown in
Table
7-12.
Description
This parameter specifies the action to be taken for the access list.
This parameter specifies the priority for the access list.
This parameter specifies the VLAN ID for which the access list has to be
applied.
This parameter specifies the Port List for which the access list has to be
applied.
This parameter specifies the Encapsulation type of the packet for which the
access list has to be applied.
This parameter specifies the non-IP protocol type of the packet for which
the access list has to be applied.
Figure 7-23. IP Standard ACL Configuration Page
ACL tab brings up the IP S
TANDARD
TANDARD
7-28
ACL C
ONFIGURATION
page
Advertisement
Table of Contents
