Supermicro SuperBlade Series User Manual page 331

Network modules, 1/10-gbps ethernet switch module, 4x qdr infiniband switch module, 10-gbps ethernet pass-through module, 1-gbps ethernet pass-through module for twinblade, 4x ddr infiniband pass-through module
Hide thumbs Also See for SuperBlade Series:
Table of Contents

Advertisement

Table 7-160. IPV6 Interface Statistics Page Parameters (Continued)
Parameter
Fwd Dgrams
Unknown protos
Discdrs
Delivers
Out Rqst
Out Discards
Out No Routes
Reasm Reqds
Reasm OKs
Reasm Fails
Frag OKs
Frag Fails
Frag Creates
Rcvd Mcast Pkts
Send Mcast Pkts
Trunctd Pkts
Chapter 7: Layer 2/3 Ethernet Switch Firmware
Description
This parameter specifies the number of IPv6 datagrams forwarded in this
port.
This parameter specifies the number of packets received with unknown
protocol.
This parameter specifies the number of received packets discarded due to
errors.
This parameter specifies the number of packets delivered.
This parameter specifies the number of transmit requests.
This parameter specifies the number of transmit discards due to errors.
This parameter specifies the number of packets to be transmitted but no
routes.
This parameter specifies the number of reassembly requests.
This parameter specifies the number or successful reassemblies.
This parameter specifies the number of reassemblies failed.
This parameter specifies the number of good fragments received.
This parameter specifies the number of fragments incompletely received.
This parameter specifies the number of fragments created.
This parameter specifies the number of received IPv6 multicast packets.
This parameter specifies the number of IPv6 multicast packets transmitted.
This parameter specifies the number of packets truncated.
7-223

Advertisement

Table of Contents
loading

Table of Contents